V.FP-14 ACE

Description

The V.FP-14 ACE is ideal for medium-demand installations requiring iron and manganese removal. Thanks to its manganese dioxide multimedia, it consistently delivers clean water with reduced iron, manganese, and organic substances.

Equipped with the PENTAIR 263/742F control valve  and 3-cycle programming, it ensures automated operation and maximum performance.

Note:

The maximum flow rate is set to maintain the required operating speed, regardless of inlet pressure. Data refers to water with max 1 ppm chlorine and max 1 ppm absorbable substances. Flow values are calculated with feed water at TDS 500 ppm and 20°C.

Technical Specifications:

• Valve Material: Thermoplastic with glass lining

• Tank Material: Pressure vessel made of fiberglass-reinforced synthetic material with threaded fibers

• Filtration Pore Size: ≤ 10 micron

• Electrical Requirements: 220 VAC / 50 Hz

• Controller Operating Voltage: 12 VAC (transformer included)

• Water Pressure Range: 2–6 bar

• Water Temperature Range: 5°C – 38°C

• Maximum Power Consumption: 5 W

• Maximum Flow Rate: Applicable when raw water contains only low concentrations of iron and manganese for removal

• Minimum Flow Rate: Applicable when continuous dosing of chlorine compounds is not performed, or when residual substances are present and the concentration of iron and manganese is higher than 1 ppm